Minimum Order Quantity | 10 Kg |
Material | Aluminium Beryllium Alloy |
Shape | Round,Flat,Wire,Blocks |
Grade | C17200,C17510,C17500 & CCNB |
Surface Finishing | Bright |
Color | Aluminium white |
Size (mm) | 1-250 |
Diameter (mm) | 1-250 |
Density (g/cc) | 8.35 |
Hardness | 36~42 HRC |
Temperature | 900 C |
I Deal In | New and Second Hand |
Condition | New |
Ingots of Beryllium is alloyed with Aluminium, Copper, Nickel, etc
Aluminium Beryllium Master Alloys
DOMADIA AlBe ALLOY is capable of supplying the following different grade of aluminium beryllium master alloys, including AlBe3.5% Aluminium Beryllium master alloys, AlBe 5.0% Aluminium Beryllium master alloys and other grade of aluminium beryllium master alloys are also available upon customers request.
Al-Be alloy system had the potential to produce a family of lightweight materials with the combined attributes of the high modulus and strength of beryllium and high ductility and fracture toughness of aluminum. Beryllium is one of the lightest aerospace structural materials with a density of 1.85 g/cc (0.067 lb/cu in.) while aluminum''s density is approximately 45% higher at 2.7 g/cc (0.097 lb/cu in.)
1). AlBe3.50% Aluminium Beryllium Master Alloys in ingot form
Chemical Composition: Be: 3.0-4.0%; Fe:0.05% Max.; Si:0.02% Max.; Mg:0.05% Max.; Cr:0.03% Max.; Ti:0.01% Max.; Pb:0.005% Max.; Al: Balance
Ingot Weight: 3-5kgs of each
2). AlBe5.0% Aluminium Beryllium Master Alloys in ingot form
Chemical Composition: Be: 4.8-5.5%; Fe:0.12% Max.; Si:0.08% Max.; Mg:0.05% Max.; Cr:0.05% Max.; Ti:0.01% Max.; Zn:0.02% Max.; Cu:0.05% Max.; Ni:0.05% Max.; Mn:0.05% Max.; Pb:0.005% Max.; Al: Balance
Ingot Weight: 3-5kgs of each
Packing: Wodden Box
Minimum Order Quantity | 10 Kg |
Color | Silver Bright |
Material | Alumiumm+Beryllium |
Alloys | Aluminium Beryllium Alloy |
Shape | Ingot |
Be % | 4,8 - 5,5 mass % of Be in ingots |
Weight ingot | 2.5 |
Aluminium-Beryllium master alloys
Aluminium-Beryllium master alloy with 4.8-5.5 mass % of Be in ingots, in pieces.Aluminium-Beryllium master alloy with 4,8-5,5 mass % of Be in pieces.
AlBe5??30SA weight of piece from 10 to 30 g
AlBe5 60SA weight of piece from 40 to 60 g
AlBe5 90SA weight of piece from 60 to 90 g
AlBe5 300SA weight of piece from 250 to 320 g
Impurities, wt. %, max | |||||||||
Fe | Mg | Cr | Si | Cu | Ni | Mn | Zn | Ti | Pb |
0.12 | 0.05 | 0.05 | 0.08 | 0.04 | 0.04 | 0.04 | 0.02 | 0.01 | 0.005 |
Aluminum Beryllium master alloy as pieces with 2.5 – 2.9 wt. % Be
AlBe2.7P50 weight of ingot from 40 to 60 g
AlBe2.7P500 weight of ingot from 450 to 550 g
Impurities, wt. % max | ||||||||||
Fe | Mg | Cr | Si | ??u | Ni | Mn | Zn | Ti | Pb | Sn, Zr,Ca,Na |
0,12 | 0,3 | - | 0,12 | 0,05 | - | - |
Color | Grey |
Material | Nickel+Beryllium |
Alloys | Ni+Be |
Customization | Be 14.5%,Be 6% |
Shape | Ingot |
Alloy % | 14.0 - 15.5 mass % of Be |
Nickel-Beryllium master alloy is produced in up to 20 kg ingots that can be crushed at a customer’s request to pieces of up to 100 mm size.
NiBe6 Grade
NiBe6 Nickel-Beryllium master alloy with 5,5 - 6,5 mass % of Be
Impurities, wt. %, max | |||
Al | C | Co | Cu |
0.05 | 0.06 | 0.05 | 0.2 |
Fe | S | Si | . |
0.1 | 0.01 | 0.1 | . |
NiBe14.5 Grade
NiBe14,5 Nickel-Beryllium master alloy with 14.0 - 15.5 mass % of Be
Impurities, wt. %, max | |||
Al | C | Co | Cu |
0.05 | 0.06 | 0.05 | 0.2 |
Fe | S | Si | . |
0.12 | 0.01 | 0.1 | . |