Beryllium Copper Alloys

C17500 / C17510

C17500 is [CuCo2Be] COPPER - COBALT - BERYLLIUM ALLOYS containing Be 0.4 ~ 0.7 % ; Co 2.4 ~ 2.7% ; Cu is Balance.
C17510 is [CuNi2Be] COPPER - NICKEL - BERYLLIUM ALLOYS containing Be 0.4 ~ 0.7 % ; Ni 1.7% ~ 2.0% ; Cu is Balance.
Both these alloys are very similar. It has better Strength and Thermal Conductivity compared to C17200. Highly used for Resistance Welding Applications.

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
• Port of Dispatch: Mumbai
• Delivery Time: Ready stock

Class Three Beryllium Copper - Alloy 17510
Specifications (17510)
ASTM B441ASTM B534MIL C-81021SAE J461SAE J463UNS C17510Class 3 Copper
Class 3 Alloy is specifically recommended for projection welding dies, flash and butt welding dies, current carrying shafts and bushings.
As castings, Class 3 Alloy (having higher strength than Class 2), is recommended for highly stressed welder structural current carrying members
and heavy duty offset electrode holders.
Class 3 Alloy is generally recommended for spot welding and seam welding steClass Three Beryllium Copper - Alloy 17510
Specifications (17510)
ASTM B441ASTM B534MIL C-81021SAE J461SAE J463UNS C17510Class 3 Copper
Class 3 Alloy is specifically recommended for projection welding dies, flash and butt welding dies, current carrying shafts and bushings.
As castings, Class 3 Alloy (having higher strength than Class 2), is recommended for highly stressed welder structural current carrying members
and heavy duty offset electrode holders.
Class 3 Alloy is generally recommended for spot welding and seam welding steels having high electrical resistance, such as stainless steels.
The Class 3 Alloy is heat treatable.
Its most common uses are in those applications that necessitate a lot of conductivity of temperature or electricity.
Its ultimate tensile strength is 140 ksi while its hardness is RB 100. The conductivity of C17510 is about 45-60% of regular copper.els having high electrical resistance, such as stainless steels.
The Class 3 Alloy is heat treatable.
Its most common uses are in those applications that necessitate a lot of conductivity of temperature or electricity.
Its ultimate tensile strength is 140 ksi while its hardness is RB 100. The conductivity of C17510 is about 45-60% of regular copper.

• Item Code: C17510
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
• Port of Dispatch: Mumbai
• Production Capacity: 1000 kg/month
• Delivery Time: 5 days

Beryllium copper c17200 round bar, also known as copper beryllium (CuBe2), beryllium bronze and spring copper, is a copper alloy with 1.7~1.9% beryllium and sometimes with other alloying elements

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
• Port of Dispatch: Mumbai
• Production Capacity: 1000 kg/month
• Delivery Time: Ready stock
• Packaging Details: Standard

We specialize in Beryllium Copper rod, but offer an additional selection of Beryllium Copper rod C17510 in a variety of additional specifications.Application:Welding

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
• Port of Dispatch: Mumbai
• Delivery Time: Ready stock

Beryllium Copper rod is a unique material combining the properties of high strength with being non-magnetic and non-sparking. ... Our Beryllium Copper material is available in hard and high hard finished round rod,Grades available C17200, C17510, C17500, CCNB etc.

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
• Port of Dispatch: Mumbai
• Production Capacity: 5 Tons
• Delivery Time: Ready stock

Huge Stock of Berylium Copper Round Bar in Mumbai and India
Specification:

• Grade: C 17200, C 17500, C 17510 and others
• Tube: 3 mm to 25 mm outer diameter
• Pipe: 25 mm to 300 mm outer diameter
• Sheet: 0.05 to 5 mm thick
• Plate: 5 to 30 mm thick
• Foil: 0.05 mm to 5 mm thick
• Round bar / square bar / hex bar: 3 mm to 250 mm outer diameter

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
• Port of Dispatch: Mumbai
• Delivery Time: Ready stock

We are engaged in offering our valued clients supreme quality Beryllium Copper Strips. The provided copper is processed using advanced technology and tools in line with industry quality standards under the guidance of vendors'' professionals. Moreover, this copper is tested against different quality measures so as to ensure its quality. The offered copper is available in variegated sizes and thickness and known for its fine finish.

Features:

• Lustrous
• Bluish-white
• Di-magnetic metal

Properties:

• Fast Heating & Fast Cooling
• Excellent Conductivity
• High Tensile Strength
• Non Oxidizing Acid Resistance
• Wear & Gall Resistant
• Non Sparkling
• High Fatigue Resistance
• Elevated Temperature Strength
• Corrosion Resistance
• Ductile, Weldable & Machinable
• High Melting Point
• Dimension Stability

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
• Port of Dispatch: Mumbai

We offer Beryllium Copper Plunger Tip alloy is a stronger, more durable alloy that performs well with today's exotic elevated silicon containing aluminum alloys, and magnesium alloys.
We have engineered proprietary alloys, HM-10 and HM-20, for excellent mechanical, thermal and wear properties, consistent high performance, and repeatable long tip life. We feature metallurgical, engineeringand design services and welcome custom specification orders.

• - 2.00% Nominal Beryllium
• - R" C" 36 Minimum
• - Good Conductivity
• - Good Thermal Properties
• - Excellent Wear Properties

• Item Code: CuBe2
• Production Capacity: 1000 pc/week
• Delivery Time: 15 days
• Packaging Details: standard

we have ready stock of copper beryllium copper sheet. Size: Width 200 MM in coil Form. We are the importers/exporter and stockist of beryllium copper sheets in alloy 25 uns C17200

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
• Port of Dispatch: Mumbai
• Delivery Time: Ready stock

We offer:ELECTRODES FOR RESISTANCE WELDING
Grades:CCNB (CuCoNiBe),
DIN 2.1285 (Mallory 100, Ampcoloy 91, Hovadur CCB)Cobalt Nickel Beryllium Copper Alloy contains approximately 1% Cobalt, 1% Nickel and 0.5% Beryllium. After hot forging and heat treatment processes this material gains considerably hardness, electrical and thermal conductivity as well. 
A very hard Copper Beryllium alloy with good electrical conductivity. Mainly used for spot and seam welding of stainless steel, but also for hot, projection and resistance welding.
Material designation, EN standard CuCo1Ni1Be
Material No., EN standard CW103C Material No., former DIN standard None.
Comparable to 2.1285 (CuCo2Be) Material No., UNS system (ASTM) None.
Comparable to C17500 (CuCo2Be) Classification RWMA (USA) Class 3
CCNB is a thermally precipitation hardenable copper alloy. In heat treated condition, the alloy combines
high hardness and high resistance to heat with good electrical and thermal conductivity
Material properties
Chemical composition in % of weight (guaranteed ranges)
Co =Ni= Be= Fe= Si others total Cu
0.8–1.3 =0.8–1.3 =0.4–0.7 max. =0.2 max.= 0.2 0.5 =Remainder
Agreed properties at 20 °C (Condition: hardened, solution heat treated respectively)
Condition hardened solution heat treated
Hardness Brinell HB min. 220 *) max. 110 *)
Electrical conductivity MS/m min. 25 max. 13
Electrical conductivity % IACS min. 43.0 max.

• Item Code: CCNB
• Production Capacity: 5 Tons
• Delivery Time: Ready

Copper Titanium - Beryllium Free Alloy
Properties -

• Non - Sparking
• Beryllium Free
• Non Magnetic
• High Hardness
• Good Strength

• Port of Dispatch: Mumbai
• Delivery Time: 15 days

DOMADIA BeCu-ALLOY is capable of supplying the following different grade of copper beryllium master alloys, including CuBe3.3% Copper Beryllium master alloys, CuBe 4.0% Copper Beryllium master alloys, CuBe10% Copper Beryllium master alloys, and other grade of copper beryllium master alloys are also available upon customers request.

1). CuBe3.30% Copper Beryllium Master Alloys in ingot form
Chemical Composition: Be: 3.0-4.0%; Fe:0.12% Max.; Al:0.15% Max.; Si:0.15% Max.; Pb:0.005% Max.; Cu: Balance
Ingot Weight: 5-17kgs of each

2). CuBe4% Copper Beryllium Master Alloys in ingot form
Chemical Composition: Be: 3.8-4.3%; Fe:0.12% Max.; Al:0.12% Max.; Si:0.12% Max.; Pb:0.005% Max.; Cu: Balance
Ingot Weight: 3-5kgs of each

3). CuBe10% Copper Beryllium Master Alloys in ingot form
Chemical Composition: Be: 9.5-10.5%; Fe:0.12% Max.; Al:0.12% Max.; Si:0.12% Max.; Pb:0.005% Max.; Cu: Balance
Ingot Weight: 3-5kgs of each

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Delivery Time: 15 Days

C17200 Beryllium Copper Strip.
C17200 primary characteristics are the excellent response to precipitation-hardening treatments, excellent thermal conductivity and resistance to stress relaxation.Application:Switches,Relays,Thermostats

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
• Port of Dispatch: Mumbai
• Delivery Time: Ready stock

The most popular alloy in the copper beryllium family is UNS C17200 and is commonly known as beryllium copper Alloy 25. In Europe, this alloy is referred to as CuBe2. It has 1.8 – 2% Beryllium and is the hardest and strongest copper beryllium material widely used

Model NO.: C14500
Application: Air Condition or Refrigerator, Water Tube, Water Heater, Oil Cooler Pipe
Shape: Round
Color: Red
Diameter: 5mm-180mm
Grade: C14500
Trademark: YCT or customized
Specification: Prime Quality
HS Code: 740911100
Type: Copper Bars
Material: Bronze
Alloy: Non-alloy
Standard: ASTM, JIS, DIN, En, GB
Length: 100-8000mm or as Required

• Item Code: C14500
• Production Capacity: 2000 kg/day
• Delivery Time: 7 days

We are Importer In India & Stockists in India of Beryllium Copper Sheet.
This Sheets are available in 2 Grade i.e :- C17200 , C17500,C17510

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
• Port of Dispatch: Mumbai
• Delivery Time: Ready stock

Beryllium Copper C17200 / Beryllium Copper Alloy 25
European Standards: CuBe2, DIN 2.1247, CW101C to EN BeCu

Chemical component:

 

Standard sizes.Diameter: 25mm - 500mm,
Length: 300mm. we are the leading supplier of White Round  PTFE Rods.

Beryllium Copper Sheet offered can be made available by us in both hot rolled/cold rolled construction finish choices. Some of its features include:
- High performance based

Our organization is one of the pioneers deeply engaged in offering a huge gamut of Beryllium Copper Sheet Grade C17200 to our clients. The provided copper sheet is manufactured using superior quality

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
• Port of Dispatch: Mumbai
• Delivery Time: Ready stock

By keeping track with the latest market development, we introduce high quality Aluminium Beryllium Ingots (AlBe5) that are used for the production of nodular graphite in cast iron. The offered ingots are processed at vendors' end using ultra-modern technology and tools in sync with the industry norms. Our offered ingots are checked on different parameters of quality so as to deliver qualitative grade at clients’ end.

Features:Moderately hard alkaline-earth metal

• Highly flammable
• Strong reducing agent

• Item Code: AlBe5
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
• Port of Dispatch: Mumbai
• Production Capacity: 1000 kg/month
• Delivery Time: Ready