Resistance spot welding is a process where heat from electrical resistance is used with force and time to weld metallic materials. The concentration of pressure and electricity in a small “spot” causes the two sheets of metal directly between the caps (seen above) to melt into a molten state. Once cooled, these sheets have been “spot” welded together.Resistance welding’s primary use is in the manufacture of automobiles, where the average car has some 5,000 spot welds. The rise of coated steels, high strength steels, and most recently hot stamped steels and aluminum in the automotive industry have presented challenges to this simple but effective joining method.
|Minimum Order Quantity||10 Piece|
|Packaging Type||Standard Box Packaging|
|Surface Treatment||Bright Copper|
|Minimum Order Quantity||1 Kilogram|
We introduce ourselves as importers & stockiest of following materials:-
High Conductivity Copper Alloys
RWMA Class 1-C1500-CuZr -Copper Zirconium
RWMA Class-1: CADMIUM COPPER
RWMA Class 2-C18150-CuCrZr-Copper Chromium Zirconium
RWMA Class 2-C18200-CrCu- Chromium Zirconium
RWMA Class 3-C17510-CuBeNi -Copper-Beryllium-Nickel
RWMA Class 3-C18600-CuNiSiCr
RWMA Class 4 ASTMB194- C17200-CuBe2-Beryllium Copper
RWMA Class 5: ALUMINUM-COPPER is recommended as a high-strength backing for other resistance material, in flash welding dies, secondary-circuit welder arms, knees, platens, etc. It can be used to advantage in structural, current-carrying members in welding fixtures where high strength, wear resistance, and non-magnetic properties are required.
RWMA Class 10:Copper Tungsten (56%W 44 %Cu)
RWMA Class 11:Copper Tungsten (75%W 25 %Cu)
RWMA Class 12:Copper-Tungsten (78%W 22 %Cu) & (80%W 20 %Cu)
RWMA Class 13:Pure Tungsten (100% W)
RWMA Class 14 :Pure Molybdenum 100%
RWMA Class 20: RWMA Class 20
COPPER-ALUMINUM OXIDE has exceptional resistance to deformation when welding and is highly recommended for weld caps when welding coated
and galvanized steels. It allows a stable start-up and generally outlasts other cap material when welding parameters are not carefully controlled.
Refractory bi-metal composite produced by a tightly controlled process of pressing and sintering tungsten powder and infiltrating the sintered material with silver.
Grade A50WS ( Tungsten Silver 50/50)
Grade A35WS (Tungsten Silver 65/35)
Grade A20WS (Tungsten Silver 78/22)
Electrode cap tips are made from class1, class2, Zirconium-Copper, Chrome-zirconium-copper and dispersion strengthen copper.
Seam Welding Wheel & Special Electrodes
Tungsten ,Tungsten-Copper & Molybdenum Electrodes
Kindly send us your requirement to quote lowest rates.