Dali Electronics

Beryllium copper fingerstrips 2000 series

Beryllium-copper fingerstrips can be used to close a gap between two conductive surfaces. They provide high EMI/RFI-shielding effectiveness in enclosure applications where extremely low closure forces are required. The Beryllium-copper contact strips have high resistance to stress relaxation, and good corrosion resistance. They can be plated with a wide range of metal finishes to ensure compatibility with any mating surface. They will not burn when exposed to radiation. Fingerstrips are the ideal product for EMI/RFI shielding across a broad frequency range. shielding strips are designed for a wide variety of application requirements. They are available in strips ranging from 16 to 24 inches in length, in continuous coils up to 35 feet long, as single fingers, or cut to requested full-finger lengths.

Features/advantages

· Excellent electrical and RF conductivity
· High tensile strength
· High shielding effectiveness
· Superb resistance to corrosion
· Very long lifespan
· Easy installation
· Numerous plating options
· Excellent performance at high temperatures
· Moisture and UV resistant

Attachment methods

· Clip-on
· Conductive adhesive
· Soldering
· Riveting
· Snap-on tracks
· Slots in your construction

EMI Shielding Beryllium Copper Finger Strip

We can offer EMI Shielding Beryllium Copper Finger Strip in various sizes.

Features

1. Good electrical conductivity, high tensile elasticity, high shielding effect, good corrosion resistance, long life, easy to install.
2. Cost-effective, a variety of plating options, excellent high temperature performance, resistance to moisture and ultraviolet light.
3. Made of high beryllium copper, have best flexibility, good electrical conductivity.
4. Special shape design, good electrical conductivity, good transmission for EMI, ESD and signal.
5. Big contact surface, good EMI effect, easy welding, excellent product reliability.

Applications

1. A wide range of diverse installation can be used for a variety of shielded room / door / cabinet doors / cover / printed board Flashboard / IC shielding.
2. Can be well used shielding material required to be placed in the top or side shield needs to sliding friction occasions.
3. Applicable from small handheld devices to large-scale shield chamber on various occasions.

Our Beryllium Copper fingerstock designs are used in many applications requiring high quality, highly effective, EMI shielding; RFI shielding; grounding clips or contact strips

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
• Port of Dispatch: Mumbai
• Delivery Time: 7 Days

EMF/RFID-Shielding Nickel/Copper Taffeta Fabric.
We offer you a broad range of protection clothing that are sure to keep you protected from harmful ultraviolet rays, direct sun rays and production of different harmful particles. We offer you EMF protection clothing, EMI Shielding Materials, Radiation protection fabrics, thermal insulation, materials and a variety of other products.We offer EMI shielding materials, radiation-proof fabrics, thermal insulation materials and other products. 
  It is a signal blocking material that offers high-grade protection, with an average attenuation of 90dB. The fabric is 42″ wide x Length

It is 

• Metallic polyester fabric coated with pure Copper and Nickel coating

EMF/RFID-Shielding Nickel/Copper material that is a top quality product for many applications including sewing, draping, pliable covering, and much more.

• Heavier, higher performing fabric than NC-I
• High Performance Taffeta Copper Nickel Conductive Shielding Fabric
• >75-105dB Attenuation in 10MHz-3.60GHz
• Excellent Radiation and EMF Wave Blocking
• Easy Application to dry, level surfaces such as walls
• 42″ Width x 1ft Length
• .10-.12mm (4 mil) Thickness

Nickel/Copper RF-Shielding Fabric with high shielding effectiveness by reflecting RF radiation.

Features:

• Heavier fabric
• Superior tarnish and corrosion resistance due to Nickel plating
• Surface Resistance: Approximately .05 Ohm/sq. ASTM F390
• 42 inch wide and sold by 1 linear foot
• Metallic polyester fabric coated with pure Copper and Nickel coating
• Light weight and flexible
• Easy to cut and sew
• Superior tarnish and corrosion resistance
• High conductivity and RF-shielding performance

Note: Nickel may produce skin allergies. Handle this material with protective gloves. The material is not intended for direct contact with the skin. It is non-toxic, tasteless, and does not decompose to toxic and irritating odor. This product can be handled for waste as normal trash.

Additional Information:

• Item Code: iFaraShield
• Production Capacity: 5000000 Mtrs
• Delivery Time: & days
• Packaging Details: Standard 25 Mtr boxes

We offer:
Nickel copper conductive fabricThin Conductive Fabric(PF)Thick Conductive Fabric(PF)Conductive non-woven fabricConductive nickel fabric

EMI Shielding Fabric TapeEMI Shielding Nickel Copper Fabric Tape(Black)EMI shielding fabric tape(PF)Metallized cloth tapeFlame retardant conductive tape

Silver Conductive Fabric
Silver conductive meshWashable elastic silver conductive fabricEMI Shielding Silver Fabric(RS)EMI shielding silver fabric.
EMI Shielding Gaskets & TapesEMI Ventilation PanelsEMI Shielded Windows and Conductive CoatingsBoard Level Shielding & Thermal ProductsRF Absorber & Ferrite Materials'

Additional Information:

• Item Code: iEMS
• Production Capacity: 100000K
• Delivery Time: 15 days
• Packaging Details: boxes

We offer Beryllium Copper Finger Stock:
Types: Clip on Series Contact RingsFold On SeriesHigh Deflection SeriesRight Agnel SeriesContact Ring SeriesTwist Series

Additional Information:

• Item Code: 3610
• Production Capacity: 10000000
• Delivery Time: Ready

DOMADIA High-Performance EMI/EMC Shielding Solutions – Conductive Fabrics & Materials

Protect your sensitive electronics with our premium range of EMI/EMC shielding conductive fabrics—designed for superior performance, durability, and flexibility. Whether you're building advanced electronics, creating secure enclosures, or minimizing signal interference, our materials deliver unmatched shielding effectiveness.

Our product lineup includes:

🔶 Copper Conductive Fabric – Exceptional conductivity with high shielding performance; ideal for wearable tech, cables, and device wraps.

⚡ Copper-Nickel Conductive Fabric – Corrosion-resistant and highly flexible, perfect for long-term shielding in complex electronic assemblies.

🔳 Conductive Nickel Mesh – Lightweight and breathable, this mesh structure ensures optimal airflow without compromising on EMI protection.

🧵 Conductive Non-Woven Fabric – A cost-effective, flexible material for wrapping, gasketing, or layering in electronic packaging.

🎯 Copper-Nickel Fabric with Conductive Adhesive – Peel-and-stick convenience with robust conductivity for quick shielding applications.

💎 Silver Conductive Fabric – High-end, ultra-conductive solution offering supreme shielding and antimicrobial properties—great for medical or defense-grade applications.

🔩 Stainless Steel Conductive Fabric – Rugged, fire-resistant shielding for industrial and high-temperature environments.

📦 EMI Shielding Pouches – Portable, secure shielding bags for phones, cards, or electronics—ensuring total signal isolation on the go.

🪡 Silver Conductive Thread – Seamlessly stitch EMI protection into garments, sensors, or smart textiles—perfect for e-textile innovations.

Why Choose Us?
✔️ Proven EMI/EMC shielding effectiveness
✔️ Custom sizes & configurations available
✔️ Reliable for military, medical, automotive, aerospace & consumer electronics

Shield Smarter. Protect Better. Perform Stronger.

Ready to upgrade your EMI protection solutions? Contact us today for samples or custom orders.

Additional Information:

• Item Code: iEMI
• Production Capacity: 100000
• Delivery Time: 15 days

We offer Ferro Magnetic shields for steel industries. It can be used in different application.